קבל הצעת מחיר מהירה ובחינם!
Micro Data Logger LogBox-AA
electronic data logger with two input
electronic data logger with two input
Micro Data Logger LogBox-AA
LogBox-AA is an electronic data logger with two input analog channels. Input data is stored in the logger internal memory, for later download to a PC for visualization and analysis in the form of tables or graphs. The data is easily exported to spreadsheets.
The LogChart-II is the software used to configure the logger, download and visualize data. The logger configuration allows defining the logger operation mode, including programming the start/stop time of data acquisition. Other parameters such as signal input type, logging interval, etc, are easily selected through the LogChart-II software.
The LogBox-AA also provides a signal for commanding an external power supply (battery) of a device connected to the logger. This feature allows that external devices, such as a transmitter, be powered only during the measurement sample time, thus extending the autonomy of these external batteries.
Input: 0-20mA, 4-20mA, 0-50mV and 0-10Vdc,
J range: -50 to 760 °C (-58 to 1400ºF)
K range: -90 to 1370 °C (-130 to 2498ºF)
T range: -100 to 400 °C (-148 to 752ºF)
N range: -90 to 1300 °C (-130 to 2372ºF)
R range: 0 to 1760 °C (32 to 3200ºF)
S range: 0 to 1760 °C (32 to 3200ºF)
B range: 150 to 1820 °C (32 to 3308ºF)
Pt100 range: -200.0 to 650.0 °C (-328 to 1202ºF)
Memory capacity: 32k or 64k readings
Interval between readings: 10 seconds to 18 hours
External battery switch time: 0 to 10 s
Power: Internal 3.6V lithium battery (1/2 AA)
Estimated autonomy: Over 2000 days (one daily download)
Working temperature: From –40°C to 70°C.
Protection: IP65, IP67 and IP68 models (see lateral label on product)
Material: ABC + PC case, Polycarbonate film;
Dimensions: 60x70x35mm
LogBox-AA is an electronic data logger with two input analog channels. Input data is stored in the logger internal memory, for later download to a PC for visualization and analysis in the form of tables or graphs. The data is easily exported to spreadsheets.
The LogChart-II is the software used to configure the logger, download and visualize data. The logger configuration allows defining the logger operation mode, including programming the start/stop time of data acquisition. Other parameters such as signal input type, logging interval, etc, are easily selected through the LogChart-II software.
The LogBox-AA also provides a signal for commanding an external power supply (battery) of a device connected to the logger. This feature allows that external devices, such as a transmitter, be powered only during the measurement sample time, thus extending the autonomy of these external batteries.
Input: 0-20mA, 4-20mA, 0-50mV and 0-10Vdc,
J range: -50 to 760 °C (-58 to 1400ºF)
K range: -90 to 1370 °C (-130 to 2498ºF)
T range: -100 to 400 °C (-148 to 752ºF)
N range: -90 to 1300 °C (-130 to 2372ºF)
R range: 0 to 1760 °C (32 to 3200ºF)
S range: 0 to 1760 °C (32 to 3200ºF)
B range: 150 to 1820 °C (32 to 3308ºF)
Pt100 range: -200.0 to 650.0 °C (-328 to 1202ºF)
Memory capacity: 32k or 64k readings
Interval between readings: 10 seconds to 18 hours
External battery switch time: 0 to 10 s
Power: Internal 3.6V lithium battery (1/2 AA)
Estimated autonomy: Over 2000 days (one daily download)
Working temperature: From –40°C to 70°C.
Protection: IP65, IP67 and IP68 models (see lateral label on product)
Material: ABC + PC case, Polycarbonate film;
Dimensions: 60x70x35mm
גולשים שהתעניינו בMicro Data Logger LogBox-AA התעניינו גם ב:
סדרת TA היא סדרה של רגשים מתכתיים אשר תוכננו לעבודה בטמפרטורות גבוהות .
הרגשים מיוצרים במספר דגמים וההבדל העיקרי ביניהם הוא בסוג המעטפת.
הרגשים מיוצרים במספר דגמים וההבדל העיקרי ביניהם הוא בסוג המעטפת.
הרגשים במבנה עם ראש מגן תבריג חיבור לתהליך וגשש קפיצי המאפשר תגובה מהירה והחלפה קלה במקרה של תקלה, סדרה זו היא שילוב של סדרות TH ו TI כאשר יש לגשש מעטפת כפולה שאינה דורשת כיס מגן. לעומת זאת אפשר להחליף את הגשש הפנימי בקלות. באפשרותנו ליצר רגשים אלו לפי כל
