Micro Data Logger LogBox-AA

Micro Data Logger LogBox-AA LogBox-AA is an electronic data logger with two input analog channels. Input data is stored in the logger internal memory, for later download to a PC for visualization and analysis in the form of tables or graphs. The data is easily exported to spreadsheets. The LogChart-II is the software used to configure the logger, download and visualize data. The logger configuration allows defining the logger operation mode, including programming the start/stop time of data acquisition. Other parameters such as signal input type, logging interval, etc, are easily selected through the LogChart-II software. The LogBox-AA also provides a signal for commanding an external power supply (battery) of a device connected to the logger. This feature allows that external devices, such as a transmitter, be powered only during the measurement sample time, thus extending the autonomy of these external batteries. Input: 0-20mA, 4-20mA, 0-50mV and 0-10Vdc, J range: -50 to 760 °C (-58 to 1400ºF) K range: -90 to 1370 °C (-130 to 2498ºF) T range: -100 to 400 °C (-148 to 752ºF) N range: -90 to 1300 °C (-130 to 2372ºF) R range: 0 to 1760 °C (32 to 3200ºF) S range: 0 to 1760 °C (32 to 3200ºF) B range: 150 to 1820 °C (32 to 3308ºF) Pt100 range: -200.0 to 650.0 °C (-328 to 1202ºF) Memory capacity: 32k or 64k readings Interval between readings: 10 seconds to 18 hours External battery switch time: 0 to 10 s Power: Internal 3.6V lithium battery (1/2 AA) Estimated autonomy: Over 2000 days (one daily download) Working temperature: From –40°C to 70°C. Protection: IP65, IP67 and IP68 models (see lateral label on product) Material: ABC + PC case, Polycarbonate film; Dimensions: 60x70x35mm